Asante IC40240-10G Скачать руководство пользователя страница 582

Страница: 582 / 792

• This command is the same as

spanning-tree edge-port

, and is only included

for backward compatibility with earlier products. Note that this command may
be removed for future software versions.

Example

Console(config)#interface ethernet 1/5

Console(config-if)#bridge-group 1 portfast

Console(config-if)#

Related Commands

spanning-tree edge-port (33-13)

spanning-tree link-type

This command configures the link type for Rapid Spanning Tree and Multiple
Spanning Tree. Use the

form to restore the default.

Syntax

spanning-tree link-type

{

auto

point-to-point

shared

}

no spanning-tree link-type

•

auto

- Automatically derived from the duplex mode setting.

•

point-to-point

- Point-to-point link.

•

shared

- Shared medium.

Default Setting

auto

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• Specify a point-to-point link if the interface can only be connected to exactly

one other bridge, or a shared link if it can be connected to two or more bridges.

• When automatic detection is selected, the switch derives the link type from the

duplex mode. A full-duplex interface is considered a point-to-point link, while
a half-duplex interface is assumed to be on a shared link.

• RSTP only works on point-to-point links between two bridges. If you designate

a port as a shared link, RSTP is forbidden. Since MSTP is an extension of
RSTP, this same restriction applies.

Example

Console(config)#interface ethernet ethernet 1/5

Console(config-if)#spanning-tree link-type point-to-point

33-15

spanning-tree link-type

Содержание IC40240-10G

























































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IC40240-10G

Отзывы:

Бренды по названию

Популярные бренды

Asante IC40240-10G, Руководство пользователя

Результаты поиска

Содержание IC40240-10G

Отзывы:

Бренды по названию

Популярные бренды