Asante IC40240-10G Скачать руководство пользователя страница 304

Страница: 304 / 792

•

Configure

– Click this button to configure the corresponding address pool.

Setting the Network Parameters

•

– The IP address of the DHCP address pool.

•

Subnet Mask

– The bit combination that identifies the network (or subnet) and the

host portion of the DHCP address pool.

Setting the Host Parameters

•

– The IP address of the DHCP address pool.

•

Subnet Mask

– Specifies the network mask of the client.

•

Hardware Address

– Specifies the MAC address and protocol used on the client.

(Options: Ethernet, IEEE802, FDDI; Default: Ethernet)

•

Client-Identifier

– A unique designation for the client device, either a text string

(1-15 characters) or hexadecimal value.

Setting the Optional Parameters

•

Default Router

– The IP address of the primary and alternate gateway router.

The IP address of the router should be on the same subnet as the client.

•

DNS Server

– The IP address of the primary and alternate DNS server. DNS

servers must be configured for a DHCP client to map host names to IP addresses.

•

Netbios Server

– IP address of the primary and alternate NetBIOS Windows

Internet Naming Service (WINS) name server used for Microsoft DHCP clients.

•

Netbios Type

– NetBIOS node type for Microsoft DHCP clients.

(Options: Broadcast, Hybrid, Mixed, Peer to Peer; Default: Hybrid)

•

Domain Name

– The domain name of the client. (Range: 1-128 characters)

•

Bootfile

– The default boot image for a DHCP client. This file should placed on the

Trivial File Transfer Protocol (TFTP) server specified as the Next Server.

•

Next Server

– The IP address of the next server in the boot process, which is

typically a Trivial File Transfer Protocol (TFTP) server.

•

Lease Time

– The duration that an IP address is assigned to a DHCP client.

(Options: fixed period, Infinite; Default: 1 day)

17-5

Configuring the DHCP Server

Содержание IC40240-10G

























































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IC40240-10G

Отзывы:

Бренды по названию

Популярные бренды

Asante IC40240-10G, Руководство пользователя

Результаты поиска

Содержание IC40240-10G

Отзывы:

Бренды по названию

Популярные бренды