GigaNIX 1000T User Manual
Version 2.0
i
Copyright 2000 Asanté Technologies, Inc., All rights reserved.
Legal Notice
This document is protected by copyright and distributed under licenses restricting its use, copying,
distribution, and decompilation. No part of this document may be reproduced in any form by any
means without prior written authorization of Asanté Technologies, Inc. Documentation is provided
“as is” without warranty of any kind, either express or implied, including any kind of implied or
express warranty of non-infringement or the implied warranties of merchantability or fitness for a
particular purpose.
U.S. Government End Users: This document is provided with a “commercial item” as defined by
FAR 2.101 (Oct. 1995) and contains “commercial technical data” and “commercial software
documentation” as those terms are used in FAR 12.211-12.212 (Oct. 1995). Government End Users
are authorized to use this documentation only in accordance with those rights and restrictions set
forth herein, consistent with FAR 12.211-12.212 (Oct. 1995), DFARS 227.7202 (Jun. 1995) and DFARS
252.227-015 (Nov. 1995).
Asanté Technologies, Inc. reserves the right to change any products described herein at any time,
and without notice. Asanté Technologies, Inc. assumes no responsibility or liability arising from the
use of products described herein, except as expressly agreed to in writing by Asanté Technologies,
Inc. The use and purchase of this product does not convey a license under any patent rights,
trademark rights, or any other intellectual property rights of Asanté Technologies, Inc.
Asante, the Asanté logo, FriendlyNET and GigaNIX are trademarks or registered trademarks of of
Asanté Technologies. All other brand names and products are trademarks or registered trademarks
of their respective holders. All features and specifications are subject to change without notice.
Regulatory Compliance
FCC Class B Notice. The equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) The device may not cause harmful interference, and 2) This
equipment must accept any interference received, including interference that may cause undesired
operation.
The equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in residential installation. The equipment generates, uses and can
radiate radio-frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If the equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna, Increase equipment and the receiver, Connect
the equipment into an outlet on a circuit different from that to which the receiver is connected,
Consult the dealer or an experienced radio/TV technician for assistance.
Do not make mechanical or electrical modifications to the equipment.
VCCI Class B Notice. The equipment is a Class B product based on the standard of the Voluntary
Control Council for Interference from Information Technology Equipment (VCCI). If used near a
radio or television receiver in a domestic environment, it may cause radio interference. Install and
use the equipment according to the instruction manual.
CE Notice. The CE mark on this equipment indicates that this equipment meets or exceeds the
following technical standards: EN 50082-1, EN55022, EN60555-2, EN61000-4-1, EN61000-4-2, EN
61000-4-3, EN61000-4-4, and EN61000-4-5.
