INSTRUCTIONS
EN
CERTIFICATION AS A CHILD SAFETY
SEAT INSTALLED IN A VEHICLE
WARNINGS
The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE R 44/04).
The seal of approval E (in a GIRAcle) and the approval number are located on the
approval label (sticker on the child safety seat).
This approval will be invalidated if you make any modifications to the child safety seat.
Only the manufacturer is permitted to make modifications to the child safety seat.
ASALVO / GIRA FIX
Tested and certified according to
ECE* R 44/04
GIRA FIX
0+I+II+III
Gruop
0-36 kg.
Body Weight
RECOMMENDATIONS
• Keep this instruction book for future reference.
• Make sure that any luggage or other objects inside the car that may cause damage
in case of an accident are properly stored and restrained.
• GIRA FIX car seat must be appropriately fastened with safety belts even when not
in use because in the case of an accident this may be sent flying causing injury
to any of the occupants of the car.
• NEVER UNDER ANY GIRACUMSTANCE should you carry your baby in your arms
in the car, or out of the car seat. Although it may seem strange, in case of an
accident, even at only 40 km/hr the force is such that it would be completely
impossible to hold onto your baby.
• Remember not to use the GIRA FIX car seat in cars with front seat air bags, unless
they can be disconnected, it is recommended that you should consult with the
manufacturers or the sales agent of your car.
MAINTENANCE & CLEANING
• The car seat can be cleaned by using lukewarm water and soap. Do not use
aggressive cleaners like abrasives or thinner.
• The cover should be washed by hand at a maximum temperature of 30ºC. Do not
put it in the dryer
Child Safety Seat