slash), along with the total number of reports in memory (after the slash). To
move the selector bar through the list, touch the scrollbar arrows to the right
of the list. The longer you touch them, the faster the bar scrolls through the
list.
To display the welding and traceability data of the selected report, touch the
“Select” button after having selected it in the list. This will populate the fields
in the right-hand part of the screen with the values saved to the selected
welding report. To reprint an extra tag of this welding operation for sticking it
onto the pipe, touch the “Tag” button.
5.3 Deleting Reports from Memory
To delete the reports stored in memory, use the appropriate option in the
configuration menu (see sub-section 4.3). Upon touching this button, a safe-
ty warning asking if you really want to delete them appears on the screen
and has to be confirmed to effectively delete the reports currently in memory.
6 System Data
6.1 Setting the Date and the Time of Day
When the “Date/Time” sub-menu was se-
lected in the configuration menu (see sub-
section 4.3), the screen shows what is repro-
duced in Display 21.
The time of day and the date can be set us-
ing the keypad shown on the touchscreen
panel.
6.2 Enabling Automatic Heating
When the “Automatic Heating” sub-menu
was selected in the configuration menu (see
sub-section 4.3), the screen shows what is
reproduced in Display 22.
This feature allows preprogramming a date and time-of-day when the heat-
ing element must start heating up. This gives you the possibility, e.g., to
enter this evening a time for the following
morning and, then, to start welding right after
arriving at the worksite instead of waiting for
the heating element to reach the appropriate
temperature.
Display 21
For the automatic heating feature to work,
the welding machine has to be connected to
the power supply and be switched on all the
time from preprogramming a time-of-day to
the start of heating. Both power supply failure
and switching the machine off result in loss of
the preset time.
Enter the desired date and time-of-day on the
keypad (after each input, the machine moves
on to the next field automatically), then touch
the “Disabled” button. This button shows the
current status of the automatic heating; when
you touch it, it changes from “Disabled” to
Display 22
Version December 2006
agru SP 110-S User’s Manual
21
