Asada ROLL GROOVER 640, Инструкция по эксплуатации

Страница: 2 / 20

ROLL GROOVER 640
2
DANGER
WARNING
CAUTION
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury. It may also be used to alert against unsafe practices.
Thank you for choosing our ROLL GROOVER 640.
● This Instruction Manual must be retained by the user of this machine.
● Read the Instruction Manual carefully and completely before use and thoroughly understand the
usage, capacity, cautions, and easy repairs for correct operation.
● Handle the machine properly to make full use of its functions for safe work.
● After reading the instructions, save this manual for rereading it when necessary.
● Use the machine for the intended application only. It will do a better job and be safer at the rate
which it was Designed for.
● Upon receiving the machine, check the following.
・Check that the machine is built conforming to the specifications stated in your order.
・Check the overall machine for any damage or deformation caused in transit due to accidents or
other reasons.
・Check that all items and accessories delivered.
In case if any discrepancy is found, immediately report the fact to the shop you purchased or our
sales office. (The contents of this manual are subject to change without prior notice.)
Precautionary signs are classified into the following 3 levels.
SAFETY PRECAUTIONS
CLASSIFICATION OF CAUTIONS
CONTENTS
CAUTIONS IN USE ................................
3
COMPONENTS OF THE MACHINE .....
6
Main Parts
............................................
6
Specifications
........................................
7
Standard Accessories
............................
7
Optional Accessories
.............................
7
PREPARATIONS ....................................
8
Preparing for Threading Machine
............
8
Preparation Before Operation
..................
9
OPERATION ...........................................
10
Installing to the Threading Machine
.........
10
Setting Materials
....................................
10
Grooving Depth Adjustment
....................
12
Grooving
...............................................
13
Checking the Size of Groove
...................
15
Changing Size ........................................
16
Replacement of Grooving Shaft
..............
16
Replacement of Grooving Roller
..............
16
MAINTENANCE & INSPECTION ..........
16
TROUBLESHOOTING ...........................
18