AS MOTOR 021917080011, Руководство оператора

Страница: 33 / 48

33
Checking and charging the battery
Warning
Batteries can be dangerous.
► Keep children away.
► Never perform any changes to the bat-
tery.
► The battery is sealed and may never be
opened.
► For all work on the battery or the battery
cables, wear safety glasses and gloves.
► If accidents with battery acid occur, al-
ways contact a doctor.
Warning
Explosion hazard
When the battery is charged, explosive
gases are generated. An explosion of the
battery can result in injuries and blindness.
► Keep open flames and ignition sources
away and do not smoke.
► Charge the battery only in well ventilated
rooms.
Warning
Danger of chemical burn
Batteries contain acids. Contact with battery
acid can result in blindness or serious
burns.
► Always keep the battery upright and do
not spill any battery acid.
► Avoid contact with skin and eyes.
► If battery acid comes into contact with
eyes, immediately rinse the eyes with
water.
If the starter does not get the engine going or
only insufficiently, charge the battery.
The battery is maintenance-free.
Use electronically controlled charging systems.
These charging systems detect the connected
battery and charge it with the required charging
current and terminate the charging process
when the battery is full.
Use a charger that is equipped with a 12 V
connection for standard norm outlets. Insert
the plug for charging into the standard norm
outlet.
Charge the battery before you put the device
away for winter storage. A fully charged battery
lasts for approx. 4 months before it needs to be
recharged.
Exchanging the battery
Warning
When you work on the battery, there is a
risk of short circuit.
► Do not put any tools or metal objects
onto the battery.
► When disconnecting and connecting the
battery, observe the order of assembly
steps.
Important: Only use original batteries.
You can buy original batteries from AS-Motor
or your authorised service centre. Also observe
all information in the operator’s manual of the
battery (if existing).
Caution! Never confuse the plus and minus
terminals.
1. Disconnect the black cable (-).
2. Disconnect the red cable (+).
3. Dismantle the battery from the device.
4. Mount the new battery into the device.
5. Connect the red cable (+).
6. Connect the black cable (-).