AS MOTOR 021917080011, Руководство оператора

Страница: 21 / 48

21
Engaging the blade
Warning
Risk of injury due to rotating blade.
► Make sure that no persons, children, an-
imals or objects are in the danger area.
Warning
Risk of injury caused by ejected objects.
► Never mow when persons, children, pets
or material assets are in the danger
area.
Only engage the blade when it can rotate
freely and does not touch objects or the
ground.
Do not engage the blade in uncut grass be-
cause when overloaded, the blade can be
damaged or wear prematurely.
1. Start the engine.
2. Move the lever for the cutting height adjust-
ment to the highest cutting position.
3. Press the blade brake clutch lever slowly
forward – the blade starts up.
4. Set the desired cutting height.
If you set the cutting height during mowing to
transport position, the blade is automatically
disengaged.
Disengaging the blade
1. Move the blade brake clutch swiftly to the
rear.
Oil pressure switch
Warning
If the device, while in use, stops in steep
terrain or the engine cuts out, the device
can roll away.
► Immediately actuate the parking brake to
prevent the device from rolling away.
The oil pressure switch ensures that the en-
gine is not damaged when the device is used
in steep terrain.
The oil pressure switch switches off the engine
when damage to the engine may occur due to
lack of oil pressure. This may occur when:
– Oil level is too low.
– The device is in too steep a sloping position
while in steep terrain.
How steep the gradient for the oil pressure
switch to switch off the engine may be de-
pends on the engine type, direction of inclina-
tion, and the oil level.
In order to restart the engine, let the device roll
to terrain that is less steep while in idle state.
In every case, check the oil level.