©2019 AS Americas, Inc.
4
How to Use
How do you adjust the nozzles for a better aim?
Our Advanced Clean™ 3.0 SpaLet® bidet seat has 5 levels of nozzle position adjustment. These
are easily changed by pressing the nozzle position arrows on the user-friendly remote.
What type of maintenance is required/recommended?
• Cleaning of the seat can be achieved buy using a cloth and a non chlorinated cleaner.
• Changing or cleaning the nozzle tips: Press the ‘Nozzle Cleaning’ button for 2 seconds to extend
the nozzles then pull the nozzle tips out. Push the tips back onto the nozzles once cleaned.
• Cleaning the nozzle shutter.
• Cleaning the deodorizer filter: Disconnect the power supply, shut the water valve off, remove the
seat, pull the screen from under the seat out, clean the filter with a small brush or toothbrush,
re-install the screen, re-install the seat, plug the seat in, turn on the water supply.
• Winterizing the seat: Only needed if the seat will not be used and the temperature of the house is
lowered. Unplug the unit, turn off the water supply, depress the seat sensor or sit on the seat and activate
the wash cycle to drain the tank, press the seat release button to remove from the toilet, remove the
strainer on the left side of the unit, tilt the seat and completely drain the water from the seat, reattached
the strainer, remove the drain plug located on the bottom of the seat, tilt the seat forward and drain,
reinstall the drain plug, reinstall the seat.
• Changing the batteries.
Is this product suitable for children?
When small children are using this product, ensure that the proper operating procedures are
followed at all times to ensure the user’s safety.
Can you customize the settings?
Yes, you can customize your cleaning experience by adjusting the water control settings, water pressure
settings (6 levels), water temperature settings (6 levels) plus the massage and oscillation features to
maximize your cleansing experience.
Can you save the customized settings?
No, You cannot save customized user settings as in user 1, user 2 but the settings will stay the same
until they are manually changed.
How do I clean this product?
You can clean the seat by using soft cloth and non-chlorinated cleaner.
Do I have to mount the remote?
No, You do not have to mount the remote if you do not have an accessible wall to mount this on
but it is recommended to do so for ease of use if a wall is located within arms reach of the toilet.
Can you turn off the deodorizer?
Yes, you can turn the deodorizer off by pressing the water temperature and nozzle cleaning buttons
simultaneously for 2 seconds.
How long does the deodorizer run for?
Deodorizing starts when a person sits on a seat and will run for 1 minute once the user stands up
and releases the seat sensor.
How long should I use a bidet?
Duration of the spraying function can last up to 2 minutes and the user can strop the spray cycle
at any time by pushing stop. The cycle will automatically stop at 2 minutes but can be extended up to
6 minutes using the massage function or pressing the spray cycle again. Duration for individual use
will vary depending on personal cleansing needs.
