Arzum BELISA AR 5024, Инструкция по эксплуатации

Страница: 43 / 48

15 ARZUM
• Open the disordered parts and separate to pinches by means of
combing or brushing your hair. Place the hair
between the straighter plates slowly and
carefully and press carefully on the keeping
places.
• You can perform the straightening
process by sliding without giving chance to
overheating for the hair from the hair bottom
parts to the hair tips. Your strengtheners
reach very high temperatures so do not leave
on your hair for more than a few seconds as this may damage your hair.
• Take the hair away from the straightener plates, release the pressure
which you apply on the pinches and allow the hair to slowly slide from
plates.
• Allow the hair to cool down before combing, brushing or touching the hair.
Otherwise, the style of your hair will be deformed.
• Repeat the process until obtaining the desired appearance.
• You can give a different appearance to the hair tips with your hair
straighter.
While the appliance is in the tip part of your hair; when you turn it inward
the hair tips will be inward, and when you turn it outward the hair tips will
be outward.
IMPORTANT:
• When you finished your work with your appliance, by means of
pressing the on/off switch, turn off your appliance and disconnect it
from the plug. Place your appliance on a heat resistance place and allow
cooling.
CLEANING AND CARE
• When your appliance is not in use, before clean and care it always
close and unplug your appliance and allow it to cool fully.
• NEVER plunge your appliance into water or another liquid. Clean the
heating plates with a damp and soft cloth and then dry them; clean also
outside of yourappliance with a dried cloth.
• Do not use harsh abrasives or cleaners which damage the surface
and plates of your appliance. Otherwise, such failures shall not be
covered by the guarantee.
EN