www.MyVacMaster.com • 800-821-7849
CLEANING AND C
ARE
Cleaning and Care
• Disconnect the power cord from the electrical outlet by
unplugging it. DO NOT disconnect by pulling on the cord.
• DO NOT immerse in water or spray directly with liquid.
• Check the Vacuum Chamber and Gasket making sure they are
clean and free of debris. If needed use a clean cloth with mild
soap.
a. Wipe the vacuum chamber clean.
b. Wipe the gasket clean.
c. Wipe the seal area clean.
NOTE: Always leave the lid in resting position when storing. DO NOT stack
items on top of the lid or machine. If the lid is closed or forced down, the
gasket will become compressed and the PRO380 may not operate properly.
• Do not store the PRO380 outside.
11
www.MyVacMaster.com • 800-821-7849
FEA
TURES
Features of the VacMaster
®
PRO380
4
1. Seal
Pad
- Provides pressure against the seal bar for a positive seal.
2. Roll
Cutter
- Cuts rolls to the desired length.
3. Control
Panel
- Controls machine functions.
4. Seal
Bar
- Provides wide, positive seals on bags and rolls up to 12”
wide.
5. Vacuum
Chamber
- Area where the vacuum packaging process
takes place and captures any overfl ow liquids.
6. Gasket
- Seals out air between the vacuum chamber and lid.
7. Accessory
Port
- Use with the accessory hose to seal VacMaster
®
storage containers.
8. Roll Storage Compartment
- Stores VacMaster
®
rolls up to
12” x 50’.
9. Built-in Cooling Fan
- For cooler, more effi cient operation.
10. Handle
- Use to open and close lid.
11. Transparent Lid
- Allows for easy bag placement.
1
6
5
3
2
7
9
10
11
8
4
