11
parts of the equipment. Ensure that no water can
seep into the device.
8.2 Air filter (B14-16)
In this connection, please also read the service
information.
- Clean the air filter at regular intervals, and
replace it if necessary.
- Remove fixing bolt on the air filter cover.
- Remove the filter elements (B16).
Important!
Do not use abrasive cleaning agents or petrol to
clean the elements.
- Clean the elements by tapping them on a flat
surface. In cases of stubborn dirt first clean with
soapy water, and then rinse with clear water and
air dry.
- Assemble in reverse order.
8.3. Spark plug (B5-6)
Check the spark plug (item 17) for dirt and grime
after 50 hours of operation and if necessary clean
with a copper wire brush. Thereafter service the
spark plug after every 50 hours of operation.
- Pull off the spark plug boot with a twist.
- Remove the spark plug with the supplied spark
plug wrench (15).
- Assemble in reverse order.
8.4 Changing the oil and checking the oil level
(B7-11)
The motor oil is best changed when the Engine is
at working temperature.
- Only use motor oil SAE - 15W40 / (<0
O
C) [SAE -
5W30].
8.4.1 Fill up Oil.
- Open the oil filler plug (9) by screw it off.
- Add exactly 0.35L engine oil with an oil filling
funnel.
Or refer to content in 8.4.2.
- Screw the Oil filler plug back.
8.4.2 Checking Oil level. (B8)
- Place the generator on a slightly inclined surface
so that the dip stick is at proper position.
- Screw off the Oil Filler plug and wipe off any oil
on the dip stick.
- Put the oil dip stick back without screw into the
Oil filler.
Important!
Do not screw the dipstick in to check the oil level;
simply insert it up to the thread.
- Check the dip stick; make sure the oil level is
between “H” and “L” mark.
8.4.3 Let out used Oil
The motor oil is best changed when the motor is
at working temperature.
- Only use motor oil (15W40/<0 oC: 5W30).
- Place the generator on a slightly inclined surface
so that the oil drain plug is at the lower end.
- Open the oil filler plug (9).
- Open the oil drain plug (16) and let the hot
engine oil drain out into a drip tray.
- After the old oil has drained out, close the oil
drain plug and place the generator on a level
surface again.
8.4.4 Changing Engine Oil
- changing engine oil refers to the content in 8.4.3
and 8.4.1.
Содержание 00030455
Страница 2: ...2 B1 B2 7 8 11 19 18 21 12 6 3 4 2 1 5...
Страница 3: ...3 B3 B7 B5 B6 B4 13 15 14 19 18 17 9...
Страница 4: ...4 B9 B10 B8 B11 B12 B13 B14 B15 9 L H 9 16 12 2 20 10 10...
Страница 5: ...5 B16...