Aruba IntroSpect Analyzer 2 Series, Быстрый старт

Страница: 2 / 5

Racking the Analyzer Appliance
Use the following steps to install Analyzer:
1. Extend and Release the Inner Rails
2. Attach Inner Rails
3. Attach Outer Rails and Install Chassis
Extend and Release the Inner Rails
1. Press the locking tabs and pull to extend the rails.
2. Press the locking tabs again to release the rails.
Figure 2
Extend and Release Inner Rails
Attach Inner Rails
1. Align left and right inner rails with chassis.
2. Firmly place rails against chassis sides. Align hooks on chassis with holes in rails.
3. Slide inner rail forward until the rails click.
4. Secure the inner rails to the chassis with screws.
Figure 3 Attach Inner Rails
Inner Rails
2 IntroSpect Analyzer 2XXX Series | Quick Start Guide