2
Aruba Instant On AP11D Access Point
| Installation Guide
LEDs
The AP11D access point has three LEDs that indicate the system, radio and PSE status of the device.
The PSE LED indicates when the access point is operating as Power Sourcing Equipment (PSE), providing Power
over Ethernet (PoE) to an external device that is physically connected to the E3 port by Ethernet cable.
Table 1
AP11D Access Point LEDs Status
Figure 2
AP11D (rear view)
LED
Color/State
Meaning
System
No Lights
Device has no power
Blinking Green
Device is starting
Alternating Green/Amber
Device is ready for setup
Solid Green
Device is ready
Solid Amber
Device has detected a problem
Solid Red
Device has an issue- immediate action required
Radio
No Lights
Wi-Fi is not ready, wireless clients cannot connect
Solid Green
Wi-Fi is ready, wireless clients can connect
PSE
No Lights
Device is not supplying PoE, or powered off
Solid Green
Device is supplying power to a connected device
Blinking Green
Negotiating PoE power supplied to a connected device
Pass-Through (PT) Port
E0 Port
