AP-MNT-MP10-X Mount Kit
Installation Guide
0512150-01 | October 2019
1
The AP-MNT-MP10-X is a low-profile mount kit for attaching AP-5xx series to existing W2/W3 wall mounts. This
mount kit is designed to work with the pre-assembled bracket on the back of the access points.
Installation
1. Route the Ethernet cable(s) through the opening on the new mount (see Figure 1).
Figure 1
Route Ethernet Cables
2. Press on the spring loaded slider of the W2/W3 mount, making sure the center post of the existing mount fits
through the center hole of the new mount (see Figure 2).
Figure 2
A #1 Phillips Head screwdriver is required for installation.
This installation guide shows the AP-220-MNT-W3 mount instructions.
AP-MNT-MP10-X Mount Kit works with W2 and W3 mounts.
1
2
3
4
