Aruba 203R Series Wireless Access Point
| Installation Guide
3
Network Status (E1)
The Network Status (E1) LED indicates activity transmitted to/from the wired ports. See
Table 3
.
Table 3
Network Status LEDs
PoE-PSE (E2) Status
The PoE-PSE (E2) LED indicates when the access point is providing Power over Ethernet (PoE) to an external
device that is physically linked to the E2 port, as shown in
Table 4
.
Table 4
PoE-PSE Status LEDs
LED Display Settings
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: Refer to
Table 1
Tables 1-3
Off mode: LEDs are off
Blink mode: LEDs blink green
Figure 2
AP-303H (rear view)
Color/State
Meaning
Off
Meets one of the following conditions:
the Device is powered off
port is disabled
no link/activity detected
Green/solid
Link established
Green/blinking
Activity detected across link
Color/State
Meaning
Off
Meets one of the following conditions:
device is powered off
port is disabled
no link established
Green/solid
Access point supplying power to a connected device
Yellow/solid
Device sourcing PoE power
Yellow/blinking
Link activity detected from a connected device
E1
E2
E0
AC
