2
Aruba 203R Series Wireless Access Point | Installation Guide
LED
The LED displays located on the front panel of the access point indicate the following functions:
System Status
The System Status LED indicates the operating condition of the access point, See .
1 blinking: 1s on/1s off
2 flashing: on/off repeated in less than 1s
Radio Status
The Radio Status LED indicates the operating mode of the access point’s radios. See
Table 2
.
Table 2
Radio Status LEDs
Table 1
System Status LEDs
Color/State
Meaning
Off
Device is powered off
Green/solid
Device is ready; fully functional
Green/blinking
1
Device is booting; not ready
Green/flashing
2
Device is ready; uplink negotiated at suboptimal speed
(<1Gbps)
Red/solid
Error condition
Color/State
Meaning
Off
Meets one of the following conditions:
both radios are disabled
device is powered off
Green/solid
Both radios enabled in access mode
Green/blinking
1
One radio enabled in access mode; one radio disabled
Amber/solid
Both radios enabled in monitor mode
Amber/flashing
Device ready; operating in power-save mode, with
uplink
negotiated at suboptimal
speed (<1Gbps)
Alternating
3
One radio enabled in access mode; one radio in monitor mode
