Usr2 is reserved for future use.
LED Mode Select Button and Mode LEDs
The state of the switch port LEDs is controlled by the LED Mode Select Button. The current view mode is
indicated by the mode LEDs next to the button. To step from one view mode to the next, press the button to
cycle through the different modes.
NOTE:
• Usr1 LED is used to indicate fault conditions.
• Usr2 LED is reserved for future use and cannot be selected with the LED mode button.
LED behavior
Table 7: LED behavior for the 8360 switch series
LEDs
Function
Switch Behavior LED State
Meaning
SFP28 port
indicator
RJ-45 port
indicator
Displays Link/Activity or
Mode information for the
port.
Startup
OFF
OS-CX: No valid
link
SVOS: Off
Normal
OFF
No valid link
Half-Bright Green Valid link
indication
FLASH Full-Bright
Green
Indicator of traffic
activity. The blink
time is roughly
proportional to
the % of full
bandwidth
utilization of the
port.
Fault
OFF
No fault
FLASH Amber
Fault
QSFP port
Displays Link/Activity or
Mode information for the
port.
Startup
OFF
OS-CX: No valid
link
SVOS: Off
Normal
OFF
No valid link
Half-Bright Green Valid link
indication
Table Continued
14
Aruba 8360 Switch Series Installation and Getting Started
Guide
