Aruba 580EX Series, Руководство по установке

Страница: 8 / 16

8
Aruba 580EX Series Hazardous Location Outdoor Access Points | Installation Guide
Figure 5
Ethernet Cable and 20A2F Cable Gland Assembly
1. Remove the dust cap from the Ethernet port
2. Slide the sealing nut, seal A, seal B, gland body and O-ring over the cable.
3. Insert the RJ45 connector to the Ethernet port.
4. Place the O-ring on the gland body, and ensure it is in place.
5. Thread the gland body into the Ethernet port and tighten to a torque of 70.5 in/lbs (8 Nm).
6. Push the seal B and seal A into the gland body and tighten the sealing nut onto the gland body to a torque of
53 in/lbs (6 Nm).
Figure 6
Ethernet Cable and 20A2F Cable Gland Installed to AP
Connecting the Fiber-optic Cable
Aruba provides a CKIT-EX-OD-SFP SFP gland kit (sold separately) to connect the fiber-optic cable to the AP. Refer
to the 580EX Series ordering guide on the Aruba website https://www.arubanetworks.com. The CKIT-EX-OD-SFP
SFP gland kit includes a SFP extension tube and a 20A2F gland, as shown in Figure 7 .
Ethernet Cable
O-ring
Gland Body
Seal B
Seal A
Sealing Nut
The fiber-optic cable is not included in the package and must be purchased separately. Purchase a suitable 6-
12 mm diameter, UV-resistant, outdoor rated cable for use with the access point.