25
FILTER CLEANING
1. Your spa is equipped with a top access filter.
To access the filter cartridge, remove the skim-
mer basket and filter cartridge.
2. Once a week remove filter, just hose it off well
and replace it. Every 4-6 weeks properly clean
your filter in a filter cleaner solution. Soak 4-6
hours (or overnight).
3. Once cleaned, re-install filter cartridge and
skimmer basket.
4. How often the cartridge filter needs to be
cleaned depends largely upon how many bathers
are using the hot tub. With average use we rec-
ommend cleaning the cartridge filters approxi-
mately every 4-6 weeks. However, more fre-
quent or greater numbers of people may require
more frequent cleaning.
SPA SURFACE
Your spa has a very high quality acrylic surface. Stains and
dirt will generally not adhere to the surface. Do not use
household products for cleaning the spa surface. Be careful
of detergents as they may contain phosphates that may con-
taminate the water and will cause foam build-up. Also,
many cleaning agents contain abrasives which will scratch
the surface, and therefore must not be used. After cleaning,
be sure to rinse the surface with water to ensure all excess
IMPORTANT
Be sure to thoroughly rinse the filter
cartridge to thoroughly remove any
cleaning agents. If this is not
accomplished, foaming of the water may
occur during the filter cycle of the hot tub.
WARNING
Make sure you replace your filter cartridges
at least once every six months.
