13
ARTLIFT
EN
BATHING
1.) Move the closure unit to "shower positi-
on": The door is not locked, and the
tub drain is open (fig. 1).
2.) Open the shower door to the inside by pulling
up the handle end (fig. 2).
3.) The shower door engages automatically when
closing and stays fixed in this position.
4.) Move the closure unit to "bath position".
Now the door is locked, and opening is no
longer possible. At the same time the drainis
closed, and you can fill the bathtub (fig. 3)
5.) After taking a bath set the closure unit to
"shower position" again (fig. 1). Now the
drain is opened again, the water runs out and
the door is unlocked.
ATTENTION: Wait with opening the door until
the water has run out completely! Do not
leave children and mentally impaired persons
without supervision!
1
3
2
