Artusi AO601, Руководство по эксплуатации

Страница: 6 / 18

The kitchen should be dry and have effective ventilation according to the
existing technical provisions
.
Main lead behind the oven must be placed in such manner to avoid touching the
back panel of the oven because of the heat it develops during operation
.
Remove any packaging materials
(
foils
,
artificial foam
,
nails
,
etc
.)
from the reach of
children
,
because they represent potential danger
.
Children may swallow small parts
,
or suffocate with foils .
This is a built
-
in oven
,
which means that its back wall and one side wallcan be
placed next to a high piece of furniture or a wall . Coating or veneer used on fitted
furniture must be applied with a heat resistant adhesive
(
100
℃
)
,
This prevents
surface deformation or detachment of the coating
.
If you are unsure of your
furniture ' s heat resistance , you should leave approximately 2cm of free space around
the oven
.
The wall behind the oven should be resistant to high temperatures
.
During
operation , its back side can warm up to around 50 above the ambient temperature ℃
Make an opening with the dimensions given in the diagram for the oven to be fitted
.
The appliance must be earthed .
Insert the oven completely into the opening without allowing the four screws in the
places shown in the diagram to
CAO6X AO601X
AO601X/1 AO601W AO601B
CAO600X CAO600W CAO600B
fall out .
(by authorised electrician)
The means for disconnection from
the supply mains having a contact
separation in all poles that provide
full disconnection under over voltage
the grounding wire shall be
longer than the other wires.
fixed wiring in accordance with the
H05VV
1.0
-F
595
554
522
542
21.5
595
595
595
554
559
512
19
564
600
560
40
564
600
560
40