Artusi AFG913X/1, Руководство по эксплуатации

Страница: 9 / 24

9
• During installation, please ensure that isolated cables are used. An incorrect connection could damage your
appliance. If the mains cable is damaged and needs to be replaced this should be done by a qualified personnel.
• Do not use adapters, multiple sockets and/or extension leads.
• The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed.
Otherwise the cord may be damaged, causing a short circuit.
• If the appliance is not connected to the mains with a plug, a all-pole disconnecter (with at least 3 mm contact
spacing) must be used in order to meet the safety regulations.
• The appliance is designed for a power supply of 220-240 V~. If your supply is different, contact the authorized
service personnel or qualified electrician.
• The power cable (H05VV-F) must be of sufficient length to be
connected to the appliance.
• The fused switch must be easily accessible once the appliance
has been installed.
• Ensure all connections are adequately tightened.
• Fix the supply cable in the cable clamp and then close the cover.
• The terminal box connection is placed on the terminal box.
2.6 ANTI-TILTING KIT
The document bag contains an anti-tilting kit. Loosely attach the anti-tilting bracket (1) to the wall using the screw (2) and
wall plug (3), following the measurements shown in the figure and table below. Adjust the height of the anti- tilting bracket so
that it lines up with the slot on the cooker and tighten the screw. Push the appliance towards the wall making sure that the
anti-tilting bracket is inserted into the slot on the rear of the appliance.
Product Dimensions (Width X Depth X Height) (Cm) A (mm) B (mm)
90x60x85 430 107