Artusi ABBQ1B, Руководство по эксплуатации

Страница: 40 / 50

40
Rev.13052022
IGNITING YOUR BBQ
CONTROL FUNCTIONS
Before lighting the barbecue:
• remove any protective cover
NOTE: The thin cover is intended to protect. The cover is not intended to be used as a cooking hood.
• Make sure that all the control knobs are in the closed (O) position
• Make sure that the cooking surfaces are clean
• Check that all the gas hoses and fittings are tight.
• Open the main gas valve.
• Open the thin or high cover.
IGNITION INSTRUCTIONS
• Do not light the burners with the cooking surfaces covered.
• To light a burner, press the knob and turn it to the “MAX” (fast pre-heating) position.
• Hold it for 5 seconds (count to 10), release it and check the flame from the slots in the front. (See page 41)
• If the burner is not lit, turn the knob to the closed (O) position. Allow the gas to disperse, and then repeat the ignition procedure.
OFF
MAX
MIN
Inspection slits
MANUAL LIGHTING
• If the automatic ignition system is not working, the barbecue can be lit manually.
• To turn it on manually, use a long match (28cm). Pass the lit match between the inspection
• slots under the front part of the hob, approaching it to the burner, then turn the knob and hold it pressed on MAX (quick
preheating) in order to perform the ignition. If it does not light, close the control valve and wait a few minutes for the gas to
disperse before trying to light the barbecue again.
• Once one burner is lit, repeat the procedure for the others, if necessary.
• Incorrect lighting of the barbecue can result in serious
injury, fire, explosion or death. If the burner does not
light, turn the gas off, wait 5 minutes to allow the gas to
disperse before attempting to light appliance again.