Artus ARTUS-903K, Руководство пользователя, Страница: 17 / 22

CST. CO., LTD.
16
4.2.6 Set the function of Bypass and Manual
1) Bypass
<Fig 4.5> <Fig 4.6> <Fig 4.7>
● The [Bypass] function is used
to adjust exercise range during exercise operating.
● Touch the [Angle] display area in screen <Fig 4.5> while exercise is operating,
[Bypass] is displayed like screen <Fig 4.6>.
● When the motion is moving in the direction of [Upper limit(flexion)] angle, pressing and
holding the [Up arrow] can increase current exercising angle over programmed
[Upper limit] angle. If it is reached at desired angle, touch [Upper limit] display area to
change [Upper limit] angle. The <Fig 4.6> shows the changing from 110° to 130°.
● When the motion is moving in the direction of [Lower limit(extension)] angle, pressing
and holding the [Down arrow] can decrease current exercising angle over
programmed
[Lower limit] angle. If it is reached at desired angle, touch [Lower limit] display area to
change [Lower limit] angle. The <Fig 4.7> shows the changing from 50° to 30°.
● [Bypass] function is not available during using the [Progressive] or [Oscillation]
function.
2) Manual
<Fig 4.8> <Fig 4.9> <Fig 4.10>