By incorporating both Shelf and Bell equalization into the design of the Trident® A, the
builders made it possible to get the best of both types of design.
Each of the four EQ bands has a rotary switch that selects any one of the four frequencies
available for EQ. Alternatively, we can also click over the desired frequency label to
automatically select it.
A novelty introduced in the Trident® A Range® consoles, and preserved in this plug-in, is the
fact that it uses long faders for the EQ level (boost or cut) adjustment, rather than rotary
knobs. The use of faders makes it very easy to see not only when equalization is being
applied, but also the amount.
Besides these controls, we have two rows of filter switch controls – Low Pass Filters on top,
to cut high frequencies, and High Pass Filters on the bottom, to cut low frequencies. Note
that we used the plural. In fact, we have not one but three filters in a row.
Each filter row has three individual push buttons that engage the three high pass and three
low pass filters, each one activating filtering for a different frequency.
The EQ section can be switched On and Off by pressing the EQ labeled buttons on the right.
Arturia - User Manual TriA-Pre - TridA-Pre OVERVIEW
21
Содержание TridA-Pre
Страница 1: ...USER MANUAL...
