ARTURIA – ORIGIN – USER’S MANUAL
61
Choose a modulation destination
Each “axis” of the 2D envelope can be assigned to a destination (or group of destinations). Likewise,
each stage of the envelope can be placed anywhere within range of those four axis points, using the
joystick to set each location.
The 2D envelope is composed of four editable points, numbered 1, 2, 3, and 4, the point 0 being
considered as a starting point for the joystick.
The T1-T4 values set the length of time for the control value to go from one point along the
envelope to the next, with a multiplier to extend the range of values between stages.
To position the four points, select the center of the joystick using the jog dial (the value “0” is
indicated at first) and slide the joystick to choose a position for this point.
Make the same for the other points (from 1 to 4).
+
Slide the joystick to choose a position for the points
From there, the only modifiable parameters are the times of durations of the movements of the
joystick between each point.
The time settings are created by selecting one of the four dedicated [T1…T5] boxes located in
the bottom right of the joystick graphic. You can also select the number value using the jog dial and
set the corresponding value from 1 to around 10,000ms.