ARTURIA – PROPHET V - MANUAL
95
Set point “3” by increasing the LEVEL to 70 and the RATE to about 3000ms. Points 2 and 3
correspond to the level of stabilization of the cutoff frequency during the time a note is
held. This is called the SUSTAIN of the ADSR envelop.
Set point “3”
Finally, adjust the settings to point “4”: place the LEVEL to 0 and the RATE to about
3000ms. The cutoff frequency is going to fall progressively to about 0 at the not release.
The phase between points “3” and “4” is called the RELEASE on the ADSR envelope.
Set point “4”
Now, let’s work with the amplitude envelope:
Click on the menu « ENVELOPE » / « AMPLIFIER »
Point “0” must be set at the maximum initial level (Value = 99) to have a maximum
volume at the beginning of the note.
