ARTURIA – Modular V – USER MANUAL
72
connected to the Trigg input) or internal, clock where the frequency is set with
the “Clock Rate” dial. The choice is made with the “Trig selection” interrupter.
The values sampled are presented as output, with more or less glide, set with
the “Glide” dial.
It is this module, when sampling noise, which is used to product random
modulations.
4.1.11
Envelope follower
Envelope follower
Time choice: Selection of follow mode
Time: Sets the constant time of the level measurement
Threshold: Sets the threshold of comparator
Follower out: Envelope follow output connection jack
Follower in: Envelope follow input connection jack
Comparator in: Comparator input connection jack
This module possesses two functions. The first generates an envelope from the
audio signal connected to “Follower in”. The “Time” setting determines the
detail for the envelope follower. The lower the value, the more the input signal
variations will be respected. This setting relies on the “Time Choice” which can
be “short” or “long”. In the first case, the analysis of the input signal will be very
precise, generating a signal with fast variation. The calculation power required
is thus heavier than the second position, where the output signal will have slow
variation.
This module also allows you to generate a trigger signal. The triggering is
calculated in relation to a certain threshold set with the “Threshold” dial and
the signal connected to the “Comparator in”. If no signal is connected to this
input, an internal connection will link the follow output to the comparator.
Time choice
Threshold
Time
Follow out
Follow in
Comparator in