Arturia DrumBrute, Руководство пользователя, Страница: 49 / 81

5.2. Copy Pattern to Pattern
5.2.1. Within a Bank
This procedure was covered more extensively in section [p.42] , but here are the basics. To
copy a pattern to a new location within the current bank:
• Select the source pattern.
• Press the Copy button.
• Press the Ptrn button.
• Press the Step button for the target location. It will flash for half a second, and
then all Step buttons will go dark except one for the original source button.

Note
: Just before selecting the destination you can see which is empty or not. Empty Patterns will
not be lit up. Non empty ones will be lit up in red. This is also the case when you choose which Pattern
to erase.
5.2.2. Between Banks (pattern)
The following procedure will allow you to copy a single pattern from one bank into a
different bank.
Let’s say you’d like to copy pattern #7 from Bank A to pattern location #15 in Bank B:
• Select Bank A, pattern #7.
• Press the Copy button.
• Press the Ptrn button.
• Press the Bank button.
• Press Step button 2 to select Bank B.
• Press the Ptrn button.
• Press Step button 15. It will flash for about a second so you’ll know the process
was successful.
5.3. Copy Drum to Drum
These procedures were covered extensively in section [p.39] :
• To copy an instrument track to another instrument within the same pattern, see
section [p.39] .
• To copy an instrument track into a different pattern in the same bank, see section
[p.39] .
• To copy an instrument track into a pattern in a different bank, see section [p.40] .
Arturia - User Manual DrumBrute - Copy/Erase Functions 44