Arturia ARP2600 V, Руководство пользователя

Страница: 72 / 95

70 ARTURIA – ARP2600 V – USER’S MANUAL
raise the filter resonance
7.2 Polyphonic patch with cabling
Let’s reuse the sound “bass1” as it will be useful to us for the next preset.
We will see how to surpass the limits of the pre-cabled (internal connections between the modules
don’t need cables). Thanks to this method, you will discover the richness of the ARP2600V.
This preset contains:
• three oscillators (VCO1, 2 and 3)
•
a low pass filter (VCF)
•
an amplifier (VCA)
•
the ADSR envelope connected to the filter
•
the AR envelope connected to the amplifier
•
a LFO connected to the filter
Drag a cable from the saw-tooth output on oscillator1 to an audio input of the filter mixer. For
this click on the VCO1 “Saw” output and direct the mouse to the “VCO1 square” audio input on
the VCF mixer.
direct the “Saw” output to the “VCO1 square” audio input on the VCF mixer
Still on this mixer, lower the VCO2 volume. You will notice the change of tone resulting from
the change of wave form on VCO1. If you need to be convinced, disconnect the cable (click on
the mixer audio input to disconnect the cable). You thus move from a saw-tooth to a square sig-
nal. Reconnect the saw-tooth to continue with this preset.
Do the same with oscillator2: direct the saw-tooth wave form to the VCO2 input on the VCF
mixer.
Save this sound as “bass1”, you can reuse it later on. For this, click on the “Save_as” button and
choose the option “new bank” (at the bottom of the menu). Provide a new name to the bank
(your initials for example), the sub-bank (“basses” for example) and to the new preset (“Bass1”
for example).