Arturia ARP2600 V, Руководство пользователя

Страница: 41 / 95

ARTURIA – ARP2600 V – USER’S MANUAL 39
Sine
5.1.3 The Filter (Filter - VCF)
The ARP2600 V possesses a multimode filter module (the original had only one resonant low pass
mode). It is possible to choose a filter type among the five offered: a low pass 24 dB (identical to
that found on the ARP2600), a low pass, a high pass, a band-pass and a notch 12 dB of the same kind
as the one found on the ARP 2500 modulars. The change of type is done by setting the selector situ-
ated on the right of the filter module.
The filter settings
As with the oscillators, the filter possesses audio connections (a mixer) and internal modulation
inputs allowing the simplification of its use.
Frequency (Initial Filter Frequency) : Sets the filter cut-off frequency, tuned between 10
Hz and 10 KHz
Fine tuning (Fine tune) : Fine tuning of the filter cut-off frequency
Resonance : Sets the filter resonance
Notch frequency / fc (Notch Frequency/ fc) : Sets the frequency of the notch divided by the
filter cut-off frequency
Filter type selector (Types) : Type of filter (LP 2600 and 2500, HP, BP and notch)
Audio output (Output) : Filter audio output connection jacks
Audio input (Audio) : Filter input connection jacks (initially connected to
the ring modulator, to the oscillators1 and 2 square,
oscillator3 sawtooth and noise)
Modulation inputs (Control) : Filter frequency modulation input connection jacks.