© 2004 – 2021 ARTRAY Co., Ltd
991SWIR-TEC-CL
Camera Link
Setting Manual
16
Rev.1.00
Please click “Setup” on menu bar, then choose “Terminal” for communication protocol settings.
The following table shows the recommended settings.
Please note that these settings are recommended for a smoother operation, but not necessary to be.
Table 6-2: Communication Protocol
Item
Settings
New-line (Receive)
CR
New-line (Transmit)
CR+LF
Local echo
Check the box
Figure 6-5: To Set up Terminal on Tera Term
After connecting camera with power, Tera Term will be initialized. Once the initialization is finished, you
will see “OK” on the dialog box. Then you can send command to control camera. Please note that
camera will start up only when you send out the command.
Figure 6-6: Initialization
