© 2004 – 2021 ARTRAY Co., Ltd
990SWIR-TEC-CL
Camera Link
Setting Manual
11
Rev.1.07
5.5.8.
Capture mode
Table 5-15: Preview Mode
1
2
3
4
Format
r
〼
-p
⏎
Details
1: r = Capture mode
2: Delimiter
3: -p = Preview
4: Line feed code
Response
Normal: OK
⏎
Abnormal: NG
⏎
Note
Configures capture as preview mode
Table 5-16: Trigger Mode
1
2
3
4
Format
r
〼
-t
⏎
Details
1: r = Capture mode
2: Delimiter
3: -t = Trigger
4: Line feed code
Response
Normal: OK
⏎
Abnormal: NG
⏎
Note
Configures capture as trigger mode
6.
Settings
6.1.
Preparation
Before connecting camera to your PC, please install Camera Link frame grabber board, including driver
and all the software necessary.
In some cases, it is required to register the license of the product, please complete the registration
before starting using the camera.
After installing, please open device manager to check if the grabber board is recognized normally.
If you use our recommendations listed in table 2-2, the device names should be recognized as follows:
Table 6-1: Devices Recognized
No.
Device
1
PIXCI®EB1 PCI Express Camera Link Video Capture Board for Win XP/Vista/7/8/10-64bit
2
PIXCI® Camera Link Serial Port (COM3
※
1
)
※
1
: Will be differ depending on systems.
