32
USING THE PROJECTOR
Using the Keystone Function
To prevent the screen image from becoming trapezoidal,
Keystone
adjusts the top and bottom width of the image if the projector is not set up
at a right angle to the screen.
Because the
Keystone
function may cause inferior screen image quality,
use this function only when it is not possible to set up the projector at an
optimal angle.

• Keystone
0
◀
-
+
▶
Close
1
Press the
SETTINGS
button.
2
Use the , , , buttons to select
OPTION 2
and press the
OK
button.
3
Use the , buttons to select
Keystone
and press the
OK
button.
4
Use the , buttons to adjust Keystone.
5
Keystone
can be adjusted from
-40
to
40
.
6
Press the
OK
button when finished.
Changing input device
To select an external input
You can select inputs connected to the projector.
•
Press the
INPUT
button on the remote control to display the input
selection screen.
-
Connected inputs are displayed first. However,
SCREEN SHARE
input is always activated.
•
Select an input signal using the remote control's
INPUT
button to
connect the projector to the desired input.
You can use the or button to switch between all the input modes.
Input List
SCREEN SHARE
USB
HDMI
ꔂ Move
ꔉ
OK
Exit
Input Label
