Important Safety
Instructions
When using this projector, always follow
basic safety precautions, including the
following:
1. Read and understand all instructions
before operating.
2. Close supervision is necessary
when used by or near children. Do
not leave unattended while in use.
3. Do not operate this equipment
with a damaged cord, or if it has
been dropped or otherwise
damaged, until it has been
examined by a qualified electrician.
4. If an extension cord is necessary,
be sure it has a suitable current
rating. Cords rated for less
amperage than this equipment may
overheat. Be careful to arrange the
cord so that it will not be tripped
over or pulled.
5. Always unplug from the electrical
outlet when not in use. Disconnect
by grasping and pulling the plug
from the outlet; never yank the cord
to disconnect the plug.
6. Allow the projector to cool
completely before moving. Loop the
cord loosely when storing.
7. If the projector receives water
damage, do not use until inspected
by a qualified electrician.
8. To avoid electrical shock hazard,
do not disassemble. Take the
projector to a qualified electrician.
Incorrect reassembly can cause an
electrical shock hazard.
9. Care must be taken as burns can
occur from touching hot parts.
10. The projector switch is provided
with the symbols 0, indicating off,
and I, indicating on.
11. Position the cord so that it will
not be tripped over, pulled or come
in contact with hot surfaces.
12. Always unplug the projector from
electrical outlet before cleaning,
servicing and when not in use.
13. To reduce risk of electrical shock,
do not immerse this projector in
water or other liquids.
14. The use of accessory attachment
not recommended by the
manufacturer may cause the risk of
fire, electric shock or injury to
persons.
15. Connect this projector to a
grounded outlet.
16. Disconnect the projector from
power supply before replacing lamps.
Set up &
Operation
1.
Room Lighting
All opaque projectors work like a
flashlight; the darker the room, the
brighter the projected image will appear.
The clearest and brightest images
are produced in a completely dark
room. For best results, operate your
Tracer in a room where you are able to
control the lighting conditions, or work
in the evening. The darker the room
conditions, the brighter and sharper the
projected image will be.
SAVE THESE INSTRUCTIONS
2
