Artnix ANX-16480, Руководство пользователя

Страница: 38 / 110

USER’S MANUAL
38
OPERATION
5.2.12 PTZ CONTROL
5.2.12.1 PTZ control in live view
Press the “PTZ” button to control pan, tilt and zoom functions of PTZ camera and the PTZ
channel, model name and ID will be displayed on the left side of the monitor as the following picture.
Press the desired camera button to be displayed.
Use the or button to pan left and right and the or button to tilt up and down.
Turn the SHUTTLE ring to zoom in and out.
Use the (-) or (+) button to focus. Or press the (AF) button for auto focusing.
Press the PTZ button again to exit the PTZ mode.
** Please refer to 6.2.8 PTZ setup of SCREEN menu, page 47.
5.2.12.2 PTZ PRESETTING
Press the “PTZ” button to enter PTZ mode.
Press the “PRESET” button to enter PRESET mode and “PTZ(PRESET)MOVE”, OSD will be
displayed on the left side of the monitor.
Move to the desired preset location using the “NUMBER” buttons.
Press the “PRESET” button again and “PTZ(PRESET)SET”, OSD will be displayed on the left
side of the monitor.
Make the desired setting of the PTZ camera using the , , , , (-), (+) buttons.
Press the “NUMBER” button to set up the revised presetting.
PRESETS
- A preset is a user-defined camera position using pan and tilt, zoom, and focus commands.
This DVR has the Programming capacity for 16 preset locations.
- This DVR has RS-422/485 terminal block telemetry port on the rear panel.