Artistic SD-16, Руководство пользователя

Страница: 42 / 72

Page 42
Artistic Quilter SD-16 User Manual
Assembly Instructions
Thread Post
1. Screw the nut to the thread post. Add washer. Thread
post into threaded hole (Figure 1 Detail). Tighten
clockwise down to the bobbin winder.
Thread Mast
2. To install thread mast, first slide the thread guide onto
the thread mast (Figure 2 Assembly Detail). Make
sure to orient the pigtail of the thread guide down,
relative to the thread mast. Next screw the nut onto
the threads at the bottom of the thread mast. Slip a
washer over the threaded portion of the thread mast
and screw thread mast into the bobbin winder base.
Position the loop at the top of the thread mast so it is
directly over the spool pin.
While holding the thread mast in position,
tighten the nut at the bottom of the thread
mast.
Position the thread guide over the nut. Angle
the thread guide slightly to the left toward the
bobbin area.Then secure the thread guide in
place using the small hex wrench to tighten
the set screw found in the collar of the thread
guide.
Assembly
Figure 2
Figure 1 and Figure 1 Detail
Assembly
Figure 2 Detail
Thread Mast
Thread Post
Loop
Pigtail Thread
Guide
Nut
Washer
Threaded
hole