Artistic SD-16, Руководство пользователя

Страница: 16 / 72

Page 16
Artistic Quilter SD-16 User Manual
1. Place a cone or spool of thread on the spool pin. If using
a spool, make sure that the slits on the spool are against
the base of the spool pin holder. Pass the thread through
the thread-mast eyelet from back to front, continuing to
thread guide A. (Figure 10)
2. Continue to the three-hole thread guide B. Beginning
at the top, wrap all three holes from back to front, hand
wheel side to needle side (see Figure 9).
Note: The purpose of the three-hole thread guide B is
to prevent loops of thread coming off the thread cone
from going into the top tension as a knot causing thread
breakage and bad tension. For most threads on a cone, it
is important to thread all three holes for consistent results
and to make adjustments at the top tension assembly. An
exception to this rule is when working with very delicate
threads, such as holographic or threads that are prone to
breakage. You may try skipping one or two holes on thread
guide B when using these threads.
Figure 9
DETAIL 1
Threading the Machine
Take Up Spring
Tension Assembly
FRONT
BACK
A
B
B
Figure 10