Artistic License micro-scope 3a, Руководство пользователя, Страница: 31 / 73

Artistic Licence Engineering Ltd. Micro-Scope 3a user guide
31 / 73
TRANSMIT
LAMP
The TRANSMIT LAMP menu
is the most powerful method
of testing automated
luminaires.
Micro-Scope contains a library of nearly 200 lamp definitions which
can be used to automatically test lamps.
When the menu is active, the UP & DOWN cursor keys are used to
select the required lamp
from the library.
To accept the lamp selection
press MENU. The display
changes to show the start address of the lamp, the current test
and the selected lamp.
At this point the DMX output will command the selected lamp to
point to its centre position with the beam on at full white and no
gobos. The following keys are active:

LEFT Decrement the start channel to the previous lamp

RIGHT Increment the start channel to the next lamp
 UP Increment by one the start channel

DOWN Decrement by one the start channel
 TOGGLE Select the next automatic test
The automatic tests consist of ramping the levels up then down
between defined values for the channels that relate to each lamp
attribute. The Speed at which the ramp operates can be defined in
Mic-Edit.
NB. If a lamp patch has not been programmed in Mic-Edit, this
menu is automatically disabled.
The automatic tests function as follows:
Name Function
On Point lamp at centre of Pan & Tilt range with a full
power white beam.
Int Ramp up and down the lamp intensity. If a dimmer
exists in the lamp it is used, otherwise the mechanical
shutter is used.
Pan Pan the beam from one extent to the other
Tilt Tilt the beam from one extent to the other.
P&T Pan & Tilt the beam from one extent, diagonally to the
other.
<PT> Pan & Tilt are controlled by the cursor keys. This is
particularly useful for manually focussing a moving
lamp.