32
When would I use this?
If you suspect that something in the DMX infrastructure (Splitter, merger, cable) is causing
interference with the data, this allows you to transmit a defined pattern while watching the output
from the suspect equipment.
DMX
–
ADVANCED
–
FIX RX Menu
This function receives DMX512, strips out all non-zero start code packets, corrects timing errors,
corrects formatting known to upset some manufacturers’ products and retransmits it.
The display provides a mimic of the first 30 channels.
Keys operate as follows:
LEFT
and
RIGHT
Not used.
UP
and
DOWN
Not used.
TOGGLE
Not used.
When would I use this?
If you suspect incompatibility between the lighting console and the fixtures, connect Micro-Scope 3c
between them using this function. If the problem was solved
–
you have your answer!
Additionally, Micro-Scope remembers the last menu when power cycled, so this is useful when you
always want Micro-Scope to boot in Fix mode.
DMX
–
ADVANCED - NETWORK Menu
This function uses the DMX test packet to check for data loss in a DMX network. The output of
Micro-Scope 3c should be connected to the primary input to your DMX network (i.e instead of the
lighting console or ethernet gateway output). The Micro-Scope 3c input should be connected to the
output of the splitter you wish to test.
DMX test packets send maximum speed packets with a worst-case payload (alternating bit patterns
which are designed to trigger any potential transmission faults).
Keys operate as follows:
LEFT
and
RIGHT
Not used.
UP
and
DOWN
Not used.
TOGGLE
Not used.
Fix Received DMX
ƑƊƊƑƊƊƑƊƊƑƑƑƊƑƑƑ
NETWORK TEST
PASS
Содержание Micro-Scope 3c
Страница 1: ...Micro Scope 3c User Guide Artistic Licence Engineering Ltd Firmware v1 7 User Guide v8 3 ...
Страница 2: ...2 ...
Страница 5: ...5 Compliance 42 Waste Electrical Electronic Equipment WEEE 42 ...
Страница 6: ...6 ...
