Artistic Licence Micro-Scope 3c, Руководство пользователя, Страница: 26 / 43

26
Use the LEFT, RIGHT, UP, DOWN keys to set the PARAMETER to START ADDR.
Micro-Scope 3c gets the parameter and displays it in the
DATA field. In this example a start address of 005.
Get the footprint of the second device’s second sub -device
Use the LEFT, RIGHT, UP, DOWN keys to set the device to 002
and sub-device to 002, shown in green. This is the second
sunDial’s second sub -device.
Use the LEFT, RIGHT, UP, DOWN keys to set the PARAMETER to FOOTPRINT.
Micro-Scope 3c gets the parameter and displays it in the
DATA field. In this example a footprint is 001 as this is a sub-
device controlling a single dimmer channel.
Set the start address of the first root device
Use the LEFT, RIGHT, UP, DOWN keys to set the device to 001,
shown in green. This is the first sunDial.
Use the LEFT, RIGHT, UP, DOWN keys to set the sub-device to
000, shown in blue. This means the root device is being accessed.
Change the start address to the desired value (value 050
shown in green) and press TOGGLE.
Micro-Scope 3c will set the value and briefly display the
response from the device. This will either be an ACK which is
good, or a NACK with additional information that explains the
reason that the device could not accept the command.
Micro-Scope 3c will the query the parameter in order to
confirm the current value.
Set the names of both devices
Setting text parameters can be laborious, but there is a trick that considerably speeds the process.
Let’s say you want to name the dimmers ‘Dim 1’ and ‘Dim 2’. Use broadca st to set all dimmers to
‘Dim ‘ and then edit each one to add the number:
Use the LEFT, RIGHT, UP, DOWN keys to set the device to ALL
and the sub-device to 000, shown in green. This addresses
both sunDial.
001 - 000 START AD
005
001 - 000 START AD
050
001 - 000 START AD
050
002 - 000 START AD
005
002 - 002 FOOTPRIN
001
002 - 002 FOOTPRIN
001
001 - 000 START AD
050 -- ACK --
ALL - 000 LABEL