
500-003111-000
5-2
a. Have the sections pertaining to theory and programming, Sections 3
and 4, been reviewed and applied to system requirements?
b. Review Section 5.4.1 and Table 5.4-1 to verify that all factory-installed
jumpers are in place. To change the board address or address
modifier response, refer to Section 5.4.2.
_______
c. Have the I/O cables, with the proper mating connectors, been
connected to the input connectors P2 and P3? Refer to Section 5.6 for
connector descriptions.
_______
d. Calibration has been performed at the factory. If recalibration is
required, refer to Section 5.5.
_______
After the above checklist has been completed, the board can be installed
in a VMEbus system. This board may be installed in any slot position, except slot
one which is usually reserved for the master processing unit.
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
*
*
*
*
*
*
CAUTION
DO NOT INSTALL OR REMOVE THIS BOARD WITH POWER APPLIED TO THE SYSTEM.
5.4 OPERATIONAL
CONFIGURATION
Control of the VMIVME-3111 board address and I/O Access Mode are
determined by field-replaceable, on-board jumpers. This section describes the use
of these jumpers, and their effects on board performance. The locations and
functions of all VMIVME-3111 jumpers are shown in Figure 5.4-1 and Table 5.4-1.
5.4.1 Factory-Installed
Jumpers
Each VMIVME-3111 board is configured at the factory with the specific
jumper arrangement shown in Table 5.4-1. The factory configuration establishes
the following functional baseline for the VMIVME-3111 board, and ensures that all
essential jumpers are installed.
a. Board Address is 0000 HEX
b. I/O Access Mode is short supervisory
c. ±10 V analog inputs and outputs
d. Analog inputs single-ended
e. Analog input and output returns connected to analog ground.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com