Artila Matrix-522, Руководство пользователя

Страница: 7 / 27

Matrix-522 User Guide
‧
3
‧
3. Pin Assignment and Definition
3.1 Reset Button
Press the “Reset” button to activate the hardware reset. You should only use this function if the
software does not function properly.
3.2 Power LED
The Power LED will show solid green if power is properly applied.
3.3 Ready LED
The Ready LED will show solid green if Matrix-522 complete system boot up. If Ready LED is off
during system boot up, please check if power input is correct. Turn off the power and restart
Matrix-522 again. If Ready LED is still off, please contact the manufacture for technical support.
3.4 Link / Act LED
When Ethernet port are connected to the network, Link/Act will show solid green and if there is traffic is
the Ethernet port, this LED will flash.
3.5 Serial / CAN Port LED
The dual color LEDs indicate the data traffic at the serial bus and CAN bus. When RXD line is high
then Green light is ON and when TXD line is high, Yellow light is ON.
3.6 Ethernet Port
Pin No. Signal
1 ETx+
2 ETx-
3 ERx+
6 ERx-
3.7 Serial Ports
Port 1~2: 3-in-1 Software Configurable
RS-232/422/485

Note

Only Port 2 has full modem signals DSR, DTR, DCD.