Matrix-518 User Guide
‧
6
‧
3.10 Factory Default Settings
LAN 1 IP Address:
192.168.2.127
LAN 2 IP Address:
192.168.3.127
Login:
root or guest (telnet guest only)
Password:
root or guest (telnet guest only)
Serial Console Port:
Baud rate: 115200
Data format: 8 Bits, No Parity, 1 Stop bit (N,8,1)
Flow Control: None
Terminal type: VT100
3.11 Power on and System Boot up
Once Matrix-518 is correctly power on, it will start boot Linux kernel and mount file system. You can
use Ethernet and telnet and login Matrix-518. Once kernel loaded, it will find
/sbin/init
and execute it.
The initialization configuration is at
/etc/inittab
. Once boot up, you can use telnet to login Matrix-518.
3.12 Inittab and Run Levels
Inittab contains information of system initialization. The system initialization script
/etc/rcS.d
runs first
then the run level 5
/etc/rc5.d
.
Matrix-518 uses run level for system setup and the default run level is
number 5. Please refer to introduction to linux (http://tille.garrels.be/training/tldp/) for information
about run level.
Following is the run levels setting:
Run level 0: halt
Run level 1 is single user (login and service are disabled)
Run level 2~5 are multiple users
Run level 6 is reboot
Please refer to loader menu section for selection of run level.
Содержание Matrix-518
Страница 2: ......
Страница 6: ...Matrix 518 User Guide 2 2 Layout 25 12 5 4 167 5 5 9 104 40 1 10 Reset Button...
