TROUBLESHOOTING
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected
to the mains socket.
Check fuse in fuse box (domestic installa‐
tion).
The programme does not start.
Press Départ/Pause (Start/Pause).
Make sure that the appliance door is closed.
The appliance door does not close.
Make sure that the installation of the filter is
correct.
Make sure that the laundry is not caught be‐
tween the appliance door and the rubber
seal.
The appliance stops during operation.
Make sure that the water container is empty.
Press Départ/Pause (Start/Pause) to start
the programme again.
Load is too small, increase the load or use
the Minuterie (Time Drying) programme.
The cycle time is too long or unsatisfactory
drying result.
1)
Make sure that the weight of the laundry is
suitable for the duration of the programme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Ensure that the room temperature is higher
than +5°C and lower than +35°C. Optimal
room temperature is 19°C to 24°C.
Set the Minuterie (Time Drying) or the Très
Sec (Extra Dry) programme.
2)
The display shows
.
If you want to set a new programme, deacti‐
vate and activate the appliance.
Make sure that the options are suitable for
the programme.
The display shows Error code (e.g. E51).
Deactivate and activate the appliance. Start
a new programme. If the problem occurs
again, contact the Service centre.
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
17
