It is possible to deactivate the
child lock option while a
programme operates. Press
and hold the same touch
buttons until the child lock
indicator goes off. The Child
Lock function isn't available for
8 s after switching on the
appliance.
Adjustment of remaining
laundry moisture
Every time you enter in the
"Adjustment of remaining
laundry moisture" mode,
previously set degree of
remaining moisture will change
into next value ( e.g previously
set
will change into
).
To change the default degree of remaining
moisture:
1. Press the on/off button to activate the
appliance.
2. Use the programme knob to set any
programme.
3. Wait approximately 8 seconds.
4. Press and hold buttons (F) and (E) at
the same time.
One of these indicators comes on:
•
the maximum dryness
•
the more dry laundry
•
the standard dry laundry
5. Press and hold buttons (F) and (E)
again until the indicator of the correct
level comes on.
If the display returns to the
normal mode (the time of
the selected programme
from step 2. will be
displayed), while setting the
degree of remaining
moisture, press and hold
buttons (F) and (E) once
again to enter to the
"Adjustment of remaining
laundry moisture" mode
(previously set degree of
remaining moisture will
change into next value).
6. After 5 s the display returns to normal
mode.
Water container indicator
By default, the water container indicator is
on. It comes on when the programme is
completed or when it is necessary to
empty the water container.
If a draining kit is installed
(additional accessory), the
appliance automatically drains
the water from the water
container. In this case we
recommend that you deactivate
the indicator of the water
container.
Deactivating the water container
indicator:
1. Press the on/off button to activate the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold touch buttons (E) and
(D) at the same time.
The display shows one of these 2
configurations:
• The display shows "Off". After 5 s
the display returns to normal mode.
• The display shows "On". After 5 s
the display returns to normal mode.
Buzzer on/off
To deactivate or activate the acoustic
signals, press and hold for approximately
11
