Bridge
The function operates when the
pot covers the centres of the
two zones.
This function connects two cooking zones
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch / . To set or
change the heat setting touch one of the
left / right control sensors.
To deactivate the function: touch /
. The cooking zones operate
independently.
When you use only one cooking zone of
the pair we recommend that you use the
rear cooking zone. Also when you use
large cookware we recommend that you
put it near to the rear cooking zone.
Automatic Heat Up
Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at
the desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
( comes on).
Immediately touch a desired heat setting.
After 5 seconds comes on.
To deactivate the function: change the
heat setting.
PowerBoost
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking
zone: touch
. comes on.
To deactivate the function: change the
heat setting.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To activate the function or change the
time: touch and then touch or to
set the desired time (00 - 99 minutes). The
function starts automatically. After 3
seconds the heat setting of the cooking
zone comes on the display.
To see the remaining time: touch for
the desire cooking zone. The display
shows the remaining time.
To deactivate the function: touch and
then touch . The remaining time counts
back to 00.
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To activate the function: touch . 00
comes on the display. Touch again to
activate the function. When this function is
active, comes on. The display shows
how long the zone operates.
To deactivate the function: set the
cooking zone with and touch . 00
comes on the timer display and after 3
seconds the heat setting appears.The
symbol goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
9
Содержание AID745FK
Страница 60: ...867333832 B 422017 ...