15
BEFORE SHIPPING
Follow the next steps to pack the device for a safe shipment:
For a safety shipment all screws must be of plastic. Otherwise Albiral Display Solutions
S.L. is not responsible for damage caused during transport.
Close the monitor carefully by hand to the position shown in the next
figure:
Hold the monitor with the hand between the frame and the monitor
housing. At the same time insert the 2 plastic screws (M8x40) entirely. To
close the monitor, leave the monitor housing and it will fall to lean on
the two plastic screws.
Insert the two lateral plastic screws (M8x30) starting by the righthand
side, screw the plastic screw into the frame until it touches the aluminium
housing without moving the aluminium housing (very fine tolerances).
Hereafter insert the lefthand side plastic screw by screwing it until it
touches the aluminium housing.
