14
CONTROLS
Monitor movement controls
On the upper cover plate, there are three buttons to control the UP and
DOWN monitor movements.
1. Raising the monitor:
To raise and tilt the monitor display, press the open button (1) on the
right hand side of the cover plate. To adjust the angle, permanent
press this button (1) while the monitor is open; the screen will slowly
move between 90 º to 110 º. When the screen is then on the desired
working angle, release the button (1). To memorise this working
angle permanently, press the middle button (2) during 2 seconds.
2. Retracting the monitor (upwards the screen):
To fold down the monitor with the screen facing up, press the
middle button (2). In this position, the screen is completely visible
and can be used in horizontal position, levelled with the table top.
It is recommended that no objects or parts of the body that could
obstruct the rising of the display, are not on the top of the cover
plate.
3. Retracting the monitor (downwards the screen):
To fold down the monitor with the screen facing down, going into
storage position, press the close button (3). Pressing this button (3),
when the monitor is closed and the screen facing up, will turn on or
off the monitor. It is recommended that no objects or parts of the
body that could obstruct the rising of the display, are not on the top
of the cover plate.
1. OPEN CONTROL BUTTON
2. CLOSE CONTROL BUTTON, FACE UP
3. CLOSE CONTROL BUTTON, FACE FOWN
Содержание Dynamic 3 AH22D3R16GA
Страница 2: ......